|
Marratech E-meetings normally
work fine with the default settings on the smaller firewalls
designed for small office or home use.
The E-Meeting client allows for
working behind NAT and is as easy as viewing a video stream from and
web site. If you would like to join an E-Meeting on ANJ Video
Portal, you may need to configure your firewall to receive data.
Only two steps are needed to allow a Marratech client to connect to
a Marratech Manager through a firewall.
First, the client must be allowed to connect to the HTTP ports (http://www.anjvideoportal.net:8000
or 151.198.208.101). If you can browse the web, this is
usually already set up in some way. The client can use a web proxy
server, which is defined in the client preferences window. See
below.
Second, the client must be allowed to send traffic to all UDP data
ports (52000 to 52999) AND it must be allowed to receive
returning traffic.
As all traffic is initiated from
the client, it is recommended that any firewalls are set up with
Dynamic State rules. This means the firewall will only be open when
the service is actually used from the inside.
The
E-Meeting ANJ Video Portal server (http://anjvideoportal.net:8000)
uses the following ports and IP addresses:
• IP Address: 151.198.208.101
• TCP ports: 80 (for http), 8000, and 443 (for https)
• UDP ports: 52000 to 52999 - These ports should be opened to "allow
return" mode.
Marratech client must be
allowed to connect to the HTTP port.. The client
can use a web proxy server, which is defined in the client
preferences window.
Marratech client must be
allowed to send traffic to all UDP data ports defined in Marratech
Manager (default is 52000 to 52999) AND it must be allowed to
receive returning traffic.
Tools
To check for sufficient bandwidth and the ability to connect to E-Meeting rooms
you may find these "tools" useful:
ANJ and NJEDge members - please
contact us for a username
and password to use the ANJ Marratech web conferencing portal's private rooms
and advanced features.
Getting started with
ANJ E-Meeting Video Portal
*Note: Marratech requires a broadband connection with at least 128 kbps in upload speed. Use of H.264 video requires Pentium IV 3.0 GHz, Dual Power PC or equivalent. Marratech does not yet support Windows Vista or Mac OS X v10.5 (Leopard).
If you run into problems using this
software, feel free to browse our support
pages for a solution or
contact
us.
back to top
|
